Accu-Pressure Safety Cap Installation Instructions

1. Unscrew and remove the existing valve stem caps (only the caps, not the stems) on your tires.
2. Make sure the O-ring seal is inside safety cap. Installation without the seal can lead to tire deflation.
3. Install a Safety Cap onto each of your valve stems by twisting in a clockwise fashion. Firmly tighten each safety cap to create a seal with the valve.
4. It is recommended that you check your installation for leaks with soapy water to insure proper seal.
5. After installation allow 30 minutes for the safety cap to display accurate pressure readings.

Guide to Color Codes

	Standard Caps ALL GREEN - Tire is properly inflated. YELLOW - Tire is approximately 5lbs. Low. RED - Tire is at least 10lbs. Low.
	Truck (Heavy Duty) Caps ALL GREEN - Tire is properly inflated. HALF GREEN/ HALF RED - Tire is approximately 10% under inflated. ALL RED - Tire is 20% or more under inflated.